Description: Files to 3-D print the Engineer from TF2's "Eureka Effect" wrench.
Author: vt8p
Release Date: 2025-04-07
Version: 3

These files are available under the terms of the Creative Commons BY-NC-SA 4.0
license.
A URL describing this license is here:
https://creativecommons.org/licenses/by-nc-sa/4.0/

Please see "Eureka Effect Built.png" for how the pieces fit together.

In addition, you will need:

* an Ethernet or similar cable to use as the wire (in the team color of your choice)
* a Gardner Bender GSW-121 or similarly sized switch
* J-B Weld Plastic Bonder or Clearweld (or similar)
* DAP Plastic Wood filler (or similar)
* filler spray primer
* grey high-gloss spray paint
* silver high-gloss spray paint
* high-gloss team-colored spray paint (e.g., Rust-oleum "Cranberry" for RED team)
* semi-gloss clear coat spray paint, for the "metal" portions of the wrench
* high-gloss clear coat spray paint, for the grips of the wrench
* black acrylic paint for the "atom" decoration on the upper jaw
* silver metallic permanent marker, for touch-ups

Changelog:
Fixed issue in WrenchHandleTang where the cut was not deep enough.